Kupo Grip

  • TWO-IN-ONE STAND
    021
    Features a removable central pole which can be easy detached from base and used as boom. The innovative locking design equipped in the side of pole and base which allows to insert the pole into the base and twist to lock. The pole will be locked firmly until the spring release botton on the side of pole is pressed. The foldable legs also makes the closed length of the stand an ideal for travelling and stroage by putting into a backpack or carrybag....... 4 risers, 5 sections. Dia. 25mm, 22mm, 19mm, 16mm, 13mm Solid flatlegs: 15mm x 5mm Aluminum material
  • MINI CLICK STAND W/ AIR CUSHION
    080AC
    8 feet Mini Click stand with 2 risers, 3 sections Dia. 1’’, 7/8’’, 3/4’’ Leg dia.: 3/4’’ Aluminum material
  • MINI CLICK STAND W/ AIR CUSHION
    070AC
    7 feet Mini Click stand with 3 risers, 4sections Dia. 1’’, 7/8’’, 3/4’’, 5/8’’ Leg dia.: 3/4’’ Aluminum material
  • BACKGROUND PAPER STAND SET
    223K
    Ideal for easy set up a background paper or any other background material with compact size kit. The set is included a 3-section telescoping pole designed for support paper rolls up to 9' in width. The pole length is adjustable from 112 cm (44” ) to 298 cm (117.3” ) for better storage and transportation. Also each end of the telescopic pole is equipped with a universal female tap which fits most standard light stands. Built from solid aluminum tube makes it strong and never be bowed........ The Kit Includes: - 3 Section Aluminum Telescopic Pole X 1 pc - Midi Click Stand w/ Air Cushion X 2 pcs (080AC) - Mini Spring Ali Clamp X 2 pcs ( Kcp-350B) - Carrying Bag X 1 pc
  • HIGH VIEW STAND
    229MB
    Aluminum stand with 5 risers and 6 sections. Dia. 50mm, 45mm, 40mm, 35mm, 30mm, 25mm Leg dia. 30mm with 3 leveling leg
  • HIGH BABY STAND
    155M
    3 risers, 4 sections. Dia.: 35mm, 30mm, 25mm, 20mm Leg: 22mm x 22mm with 1 leveling leg Chrome plated steel
  • 3 SCT WIND-UP STAND W/AUTO SELF-LOCKING DEVICE SILVER
    483T
    3 sections. Dia.: 55mm, 45mm, 38mm. Leg dia.: 30mm. 2 risers extend simultaneously at one elevation of 4.4cm per handle turn. Safety cable ensures simultaneous retrieval of all sections. Chrome plated steel stand w/geared column. With 1 leveling leg. [Video]
  • HEAVY DUTY WIND-UP STAND WITH BRAKED CASTER
    484
    3 sections., Dia.: 70mm, 60mm, 50mm Leg dia.: 35mm 2 risers extend simultaneously at one elevation of 4.4cm per handle turn. Top 2 sections: Chrome plated steel Center tube & legs: Stainless steel With 1 leveling leg With Auto Self-Locking Device With Braked Caster.. 80kg . 176.3lbs
  • MASTER CINE STAND
    542M
    2 risers, 3 sections. Dia.: 45mm, 40mm, 35mm Leg : 25mm x 25mm With 1 leveling leg Chrome plated steel
  • MASTER HIGH CINE STAND
    543M
    3 risers, 4 sections. Dia.: 45mm, 40mm, 35mm, 30mm Leg: 25mm x 25mm With 1 leveling leg Chrome plated steel
  • K STAND-JUNIOR BOOM STAND
    546M
    3 Risers 4 sections Dia.: 45mm, 40mm, 35mm, 30mm Leg: 25X 25mm Chrome Plated Steel With one leveling leg
  • CT-40MK 40,, C STAND KITS (SILVER)
    CT-40MK 40
    including : CT-40M/B, KCP-200/B and KCP-241/B Master Series C Stand Kits w/Turtle Base (Quick Release C Stand) including one grip arm and 2.5” grip head 2 riser, 3 sections Dia. 35mm, 30mm, 25mm Chrome plated steel for silver Powder coated steel for black
  • Chromakey Gaffa Tape
    GT-550CKGN
    GT-550CKGN Size: 48 mm (W) x 50M (L) Availability in Color: Green (GN)
  • Black Matt-surface Gaffer Tape
    GTM-550B
    Kupo Grip GTM-550B Matt-surface Gaffer Tape 48mm x 50M / Black
  • Kupo Matte Gaffa Tape Gray
    GTM-550G
    Kupo Matte Gaffa Tape 48mm x 50M / Gray
  • T.V. CLAMP Black
    KCP-100B
    The KCP-100 T.V. Clamp is a heavy duty casting C clamp and supplied with a Tommy bar to improve grip. It terminates in a 28mm(1-1/8”) junior receiver. Collar ring on bushing for supplied safety hitch pin to pass through fixture spigot. There is a dedicated aperture in clamp body for attaching safety cable. This clamp works for diameter from 22-54mm round tube with load capacity 100kgs. It is ideal to hang all types of luminaries in T.V. studio and theaters.
  • MAX ARM W/ RATCHETED HANDLE
    KCP-101
    The Max arm is especially designed for lighting, video, film or stills use. The multi-positioning arm with 90° pivoting, 360° rotating ends and a 360° elbow rotation. The center ratcheted handle to control and lock all three movements, which allows partial loosening for safe and precise positioning of a small light fixture or camera exactly at the angle you need it. Both ends come with a ball joint 5/8”(16mm) studs; one is tapped for a 3/8” and the other is tapped for a 1/4”. It is so versatile that can be set at any awkward position or odd place. Maximum Height: 53cm (20.8”) / Weight: 1kg (2.21lbs) / Maximum Load: 4kg (8.8lbs) Features: 1. Metal adjustable lever handle for easy slight adjustment and can be rest to any angle. Ideal for clamping in a confined space, or a specific handle position is desired. 2. The metal-like engineering thermoplastic friction discs with teeth design offers a solid grip. 3. The storage length is 28.5cm and fully extend to 53cm with net weight 1kg only for compact & portable. 4. Both ball joint stud with multi-milling flats that can fit into baby socket fast and hold object stable.
  • MAX ARM W/ WHEEL HANDLE
    KCP-101W
    The function is as the same as KCP-101 Max Arm but with wheel handle which comes with rubber cover. This is standard accessory designed for KCP-101W for more comfortable and better torque while tightening the round knob especially for those users without gloves in cold working environment. This is made by silicon rubber which offers excellent weather durability for long-lasting operation. Maximum Height: 53cm (20.8”) / Weight: 1kg (2.21lbs) / Maximum Load: 4kg (8.8lbs) Features: 1. Metal adjustable lever handle for easy slight adjustment and can be rest to any angle. Ideal for clamping in a confined space, or a specific handle position is desired. 2. The metal-like engineering thermoplastic friction discs with teeth design offers a solid grip. 3. The storage length is 28.5cm and fully extend to 53cm with net weight 1kg only for compact & portable. 4. Both ball joint stud with multi-milling flats that can fit into baby socket fast and hold object stable.
  • MAX ARM KIT
    KCP-101K
    The Same fuction as KCP-101CB but with more standard accessories included Convi clamp KCP-710, Max Arm KCP-101, Camera Bracket KS-CB01 and backlite base 013BS.
  • GRIP HEAD
    KCP-200
    2-1/2” Grip Head - Silver . 0.78kg . 1.72lbs
  • GRIP ARM
    KCP-240
    40” Extension Grip Arm - Silver
  • EXTENSION GRIP ARM WITH BABY HEX PIN-SILVER
    KCP-241
    40’’ EXTENSION GRIP ARM WITH BABY HEX PIN-SILVER Baby hex pin It features the arm terminated with a hex baby pin which is suitable for mounting a lighting fixture or anything with baby receiver.
  • KINO FLO FLUORESCENT LAMP HOLDER
    KCP-413
    esigned for holding a single Kino Flo T-12 fluorescent lamp / tube with double spring steel clips. Swivel ball joint design coming with neck-embossed 5/8" Baby stud can neatly mount in a grip head, c-stand, or gaffer grip for offering multi-positions. Metal adjustable lever handle designed for a specific handle position is desired. Weight: 300 g (0.66 lbs)
  • 4-1/2,, GRIP HEAD W/ A JUNIOR STUD AND RECEIVER
    KCP-450
    It is designed to convert a junior stand into an overhead stand. The V jaws feature 3/8,, and 5/8,, diameter and able to offer positive lock for a gobo arm, large flag or butterfly in all directions.
  • LARGE GAFFER GRIP
    KCP-500
    Quick release multi-purpose clamp which will grip flat surface or barrels. It comes with a tension control knob and a 5/8,, socket & stud for two small fixtures or grip items. The clamp works on diameter from 1/4,, to 3-1/8,,. Weight:1.25kg (2.8lbs) Loading: 10kg (22lbs)
  • ADJUSTABLE GAFFER GRIP
    KCP-550
    Two small fixtures or grip items can be mounted onto the 5/8" spigots including one fixed on the clamp and the other is detachable stud, which is with 3/8,, and 1/4,, thread, embedded in the 5/8,, female receiver. Jaws is adjustable from 0.98 - 2.56,, (2.5 - 6.5cm). Weight: 0.66kg( 1.5lbs)
  • SUPER VISER CLAMP
    KCP-600
    KCP-600 SUPER VISER CLAMP 4,, (10.16 CM)
  • SUPER VISER CLAMP (longer)
    KCP-601
    KCP-601 SUPER VISER CLAMP (CENTER) 9,, (22.90 CM)
  • SUPER VISER CLAMP (45 CM)
    KCP-601L
    KCP-601L SUPER VISER CLAMP 17.5,, (45 CM)
  • CONVI CLAMP W/RACHETED HANDLE-BLACK
    KCP-710B
    The Convi clamp with Racheted Steel Handle features a ratcheted handle that allows to rotate the handle in a complete circle to tighten or loosen it in a very tight operating space. .. 20kg - 44lbs
  • ADJUSTABLE BABY SIDE ARM
    KCP-818
    Designed for offsetting lighting fixture or accessories with a twin baby (16 mm) pins from a stand. Features an adjustable quick release coupler makes mount on the tube size from 25 ~50 mm and position anywhere along the 15'' ( 380 mm) length quick and easy. Weight: 2.1 kg ( 4.62 lbs)
  • TRUSS COUPLER SILVER & BLACK
    KCP-835
    D- For tube o 48-51 mm - Centers: 197 - 402 mm - Suitable for all triangular / square truss sections... w 3.30 kg / Max 200 kg
  • 3 Way Clamp For 25mm To 35mm Tube
    KCP-930P
    The 3 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.0 ?ï_ 1.4in (25 _ 35mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 3 Way Clamp has three recessed mounting locations distributed in 90 degree increments in to accept a series of interchangeable accessories.
  • 4 Way Clamp For 40mm To 50mm Tube
    KCP-950P
    This 4-way clamp from Kupo is designed to couple onto any surface from 35mm to 50mm. Be it a stand, a kupole, or scaffold tube vertical / horizontal, the 4-way clamp offers versatility to any round tube.
  • 5/8in COMPACT ALU. SNAP IN PIN
    KS-020
    Lightweight aluminum 5/8in (16mm) adapter with hex stud for Convi clamp and round head in the other side. Special for Desisti & Ianiro lighting fixtures.
  • Babay stud for 4 way and 3 way clamps
    KS-091
    Kupo KS-091 Lightweight aluminum 5/8in stud which is designed for connecting 4 way clamps and 3 way clamps with grip head ( KCP-200) and total length is 108mm.
  • Female Socket Adapter For 4 Ways Clamp
    KS-093
    Lightweight aluminum 5/8in Female Socket Adapter For 4 Ways Clamp .
  • ROLY POLY COUNTERBLANCED UMBRELLA SWIVEL BRACKET
    KS-101RP
    A heavy-duty cast aluminum alloy bracket features a counterbalance mechanism design to prevent your speelite from flopping over when the knob is loosened. With non-slip aluminum disk equipped between two teeth frictional aluminum brackets and ratcheting locking handle, the speedlite or lighting fixture is able to be locked securely in place and a hole with a knob-screw to lock an umbrella shaft in place.
  • JUNIOR TO BABY ADAPTER
    KS-200
    This adapter converts 1-1/8in female receiver to 5/8in male stud. Well constructed by solid steel with chrome plated and very helpful to fits into a heavy duty light stands and T.V. clamps or turtle base C stand to mount standard studio flash or video lighting fixtures.
  • OFF CAMERA FLASH SPRING CLAMP
    KCP-390
    TConstructed by lightweight aluminum Ali clamp and sturdy steel ball head for off camera flash light in a variety of situations. The clamp also comes with adjustable aluminum cold shoes which offers not only different size holder of flash lights but also long-lasting operation than plastic one. It's easy and convenient to attach the clamp to the plank or tube from 5~40mm with the strong spring steel equipped inside the clamp. The 16mm stud with 3/8in thread hole and the sockets attached with the clamp can be connected with light stands and unbrella. Weight: 0.33kg (0.73lbs) / Loading: 2kg (4.4lbs) - The holes designed for umbrella.
  • (15.2CM) CHAIN CLAMP
    KCP-605
    TWith the flexible chains, it can hold around any shape of wide size objects and adjust quickly by turning 5/8in baby stud in the rear of clamp. Meanwhile, the safety T-handle is also designed to eliminate any risks of unexpected looseness of the trigger.
  • (25.5CM) CHAIN CLAMP
    KCP-606
    TWith the flexible chains, it can hold around any shape of wide size objects and adjust quickly by turning 5/8in baby stud in the rear of clamp. Meanwhile, the safety T-handle is also designed to eliminate any risks of unexpected looseness of the trigger.
  • STEEL BABY BOOM
    KCP-640M
    This boom arm can be used to position reflectors, flash heads, screams, tungsten lights and muslin backdrops. A chrome steel boom with 5/8in baby stud, telescopes from 3 8in -7 8in (1.1-2.4M) and supports upto 11lbs (5KG) when fully extended. The heavy duty tilt locking device is designed to cooperate with standard grip head to provide a tightly lock ability and it allows the boom to slide within it to adjust the balance of your load. The hook end allows hanging a sandbag for added support. With 5/8in (16mm) light stud 2 risers, 2 sections (Dia.: 25mm, 30mm)
  • (16MM) MALE ADAPTER
    KS-027
    Steel made 5/8in (16mm) Adapter with tapped M10 thread female.
  • (16MM) MALE ADAPTER
    KS-037
    Steel Made 5/8in(16mm) Adapter With tapped 3/8in -16 thread female.
  • JUNIOR MULTI HEADER
    KS-055
    Constructed by solid steel square tube with 100cm (40in) length and anti-reflection black coating. Five junior receivers are well-welded for maximum five lighting fixtures. Attached with a junior stud (28 mm) for universal stand top or any mounting accessories coming with junior socket. Max loading weight is 50KG but please note that when load on one side only, max loading weight would be 15 KG.
  • JUNIOR OFFSET ARM
    KS-059
    The 470 mm Junior Offset Arm with a junior pin and receiver, offset a large light fixture from its stand. Mounts to a stand with a junior pin top, with junior receiver which light can be mounted either over or under way (a safety linchpin is attached).
  • LONG DOUBLE STUD-5/8
    KS-074
    4.9in long double 5/ 8in baby stud designed to connect a lighting fixture to Convi clamp or an arm with a grip head.
  • BABY ADJUSTABLE OFFSET ARM- BLACK
    KS-158B
    The same function as KS-058 but supplied with a length-adjustable device which allows you to extend the length from 48 to 71 cm for the flexibility to adjust the distance from the center.
  • JUNIOR ADJUSTABLE OFFSET ARM
    KS-159B
    The same function as KS-059 but supplied with a length-adjustable device which allows to extend the length from 48 to 71 cm for the flexibility to adjust the distance from the center (a safety linchpin is attached).
  • BUTTERFLY FRAME
    KH-06
    BUTTERFLY FRAME (1.8m x 1.8m)
  • BUTTERFLY FRAME
    KH-08
    BUTTERFLY FRAME (2.4m x 2.4m)
  • BUTTERFLY FRAME
    KH-12
    BUTTERFLY FRAME (3.6m x 3.6m)
  • BKU-HAND SERIES (GOAT LEATHER) Large / Black
    KH-55LB
    KU-HAND is designed for multi-task to protect users. Ergo-oriented brings comfort fit to all users. Padded mesh on leather top is for excellent ventilation; two-way stretch creates flexibility. Synthetic leather palm is soft and durable. Extra leather layer on palm, index finger and thumb for better strength and protection. Smooth texture of fingers and reinforced fingertips make perfect on handling objects and reduce wear.
  • KUPOLE Extends From 210cm to 370cm
    KP-L2137BD
    AWeight: 2.85KG (6.3lbs) Extends from 210cm(83in) to 370cm(145in)
  • KUPOLE Extends From 150cm to 270cm
    KP-M1527BD
    Weight: 2.45KG (5.4lbs) Extends from 150cm(59in) to 270cm(106in)
  • KUPOLE Extends From 100cm to 1²70cm
    KP-S1017BD
    Weight: 2.0KG (4.4lbs) Extends form 100cm(39.4in) to 170cm(67in)
  • LONG TELESCOPIC HANGERS WITH STIRRUP HEAD
    KTHS-0510
    CLOSED LENGTH: 152.4cm (5 feet) / MAXIMUM HEIGHT: 304.8cm (10 feet) / WEIGHT: 6.7kg (14.8lbs) / MAXIMUM LOAD: 40kg (88lbs)
  • MEDIUM TELESCOPIC HANGERS WITH STIRRUP HEAD
    KTHS-0408
    CLOSED LENGTH: 121.9cm (4 feet) / MAXIMUM HEIGHT: 246.8cm (8 feet) / WEIGHT: 6kg (13.2lbs) / MAXIMUM LOAD: 40kg (88lbs)
  • UNIVERSAL ADAPTER SPIGOT
    KS-017
    Universal 5/8In (16mm) stud w/ 3/8In-16M and 1/4In- 20M.
  • 16MM STUD W/M10 THREAD
    KS-018
    Easy to be mounted on the yoke of lighting fixture with the M10 thread and butteryfly knob.. And connected with Convi clamp with 5/8In (16mm ) stud.
  • Double Suction Cup with 16mm Baby Pin
    KSC-02
    Double Suction Cup with 16mm Baby Pin Position the cup, push down the handle to remove air from between the rubber pad and the contact surface. Pull the handle vertically and remove the cup when not in use. W max 15kg
  • Double suction cups equipped with rugged die-casting camera
    KSC-022
    Double suction cups equipped with rugged die-casting camera platform which comes with industrial standard 1/4In-20 mounting screw allows all motorsport enthusiasts to quickly and easily create videos or photography. Retacheted knobs are designed to tilt the camera platform without space limits. vertically and remove the cup when not in use. W max 15kg
  • SUCTION CUPS
    KSC-03
    6In pumping suction cup with 3/8In-16 thread x 5/8In length stud for use with ball head camera mounts. ( Supplied with pad protector) W max 32kg
  • SUCTION CUPS
    KSC-04
    6In pumping suction cup with fixed baby pin. ( Supplied with pad protector).. W max 32Kg
  • SUCTION CUPS
    KSC-06
    6In pumping suction cup with swivel baby pin which is fixed with cup. ( Supplied with pad protector).. W max 32Kg
  • Sand Bag 15Kg
    KSD-1680C
    Dimension: 36 cm X 33 cm X 6 cm, Construction: Reinforced double Ply Nylon Maximum loaded weight: 35 lbs/ 15 kg Sand Bag with 35 lbs ( 15 kg ) loading weight is available, but the features are without double velcro and spring lock.
  • Shot Bag 6Kg
    KSF-15
    Shot Bag 6Kg / 15lbs
  • WRAP AND GO SHOT BAG 2,27Kg
    KSW-05
    WRAP AND GO SHOT BAG Maximum load weight: 2,27Kg
  • WRAP AND GO SHOT BAG 4,55Kg
    KSW-10
    WRAP AND GO SHOT BAG Maximum load weight: 4,55Kg
  • Safety wire
    SW-01
    Dia. slash; 3.2 mm, 7 x 19 wire / SWL: 10kg / A: 75cm / B: 60mm / C: 5.8mm / D: 7.8mm .// Kupo Safety wire Is fabricated of galvanized steel wire, and constructed in accordance with DIN3055 and DIN3060. It is used as secondary bonding for rigging, lighting and other equipments to truss or stand, rendering a secondary flexible coupling in additional to regular fixture. Standard finish is metallic silver and black coating is available upon request.
  • Safety wire
    SW-03
    Dia. 5.0 mm, 7 x 19 wire / SWL: 50kg / A: 100cm / B: 60mm / C: 5.8mm / D: 9.7mm .// Kupo Safety wire Is fabricated of galvanized steel wire, and constructed in accordance with DIN3055 and DIN3060. It is used as secondary bonding for rigging, lighting and other equipments to truss or stand, rendering a secondary flexible coupling in additional to regular fixture. Standard finish is metallic silver and black coating is available upon request.
  • Safety wire
    SW-04
    Dia. 3.2 mm, 7 x 19 wire; Dia 4.5 mm (with PVC jacket) / SWL: 10kg / A: 75cm / B: 60mm / C: 5.8mm / D: 7.8mm .// Kupo Safety wire Is fabricated of galvanized steel wire, and constructed in accordance with DIN3055 and DIN3060. It is used as secondary bonding for rigging, lighting and other equipments to truss or stand, rendering a secondary flexible coupling in additional to regular fixture. Standard finish is metallic silver and black coating is available upon request.